How to Reset Traeger Grill

How to reset Traeger grill

Resetting a Traeger, or any pellet grill is something every home cook needs to know how to reset Traeger grill. The process involves turning off the unit and emptying the hopper, which is not as simple as it sounds. If you understand the process and have done it once before with your Traeger, you won’t stand there scratching your head.

And that’s good news if you’re an avid Traeger user because sooner or later you will need to reset your Traeger. Whether it’s due to a malfunction in the electronics or just a clogged hopper from overuse of pellets, at some point you will need to reset your Traeger.

 In this article we will walk through resetting the Traegers:

Why the Traeger Reset is Important

A reset of your Traeger will help to make sure that you get the most out of your investment. That’s because when you reset the unit, you are clearing any errors and bad programming that may have occurred during normal use. 

Anytime there is a reset, you need to go through the normal startup procedure with the unit again. That ensures that you have a clean start with the unit, which will help to prevent other problems from occurring in the future. 

Resetting your Traeger is not something you will have to do every day, but it is something you should do at least once every few months.

How to Reset a Traeger Grill

If you need to reset your Traeger then follow these instructions;

  • The first thing you will want to do is turn the unit off. Then unplug the grill from the electrical outlet. Once that is done, open the door and remove all the food from the grill. 
  • Next, pour one cup of water onto the burning coals. Close the door and let the water evaporate. This will help to clean the inside of the grill so that the unit can be properly reset. 
  • If your Traeger has a thermometer, remove it from the grill and let it cool down. 
  • Finally, plug the unit into a power outlet and press the “BEEP” button on the control panel. 
  • Hold that button until the control panel beeps, which will reset the unit. Once the unit has been reset, it’s a good idea to cook a few pieces of meat to help reseason the grill
  • Now that your Traeger has been reset, it is ready to be used again. 
  • If you have reset the unit due to malfunctioning, be sure to contact Traeger’s customer service through their website or by phone. They may be able to give you some troubleshooting advice over the phone.

Step by step procedure for resetting a Traeger

Traeger Won’t Turn On/ Off

If your Traeger won’t turn on, there are several possible causes. The most common reason for this is a power outage. If the power has gone out in the area, resetting the circuit breaker will turn the power back on. 

If your grill is plugged into a GFCI outlet, the grill could have tripped the GFCI protection circuit. Resetting the GFCI will turn the power back onto the circuit. 

Traeger – Hopper Has Stuck Pellets

If the pellets in your hopper have become jammed and the grill won’t feed pellets properly, reset the grill. Open the grill and remove the hopper. Empty the hopper, then take it outside or to a well-ventilated area. 

Use compressed air to dislodge the pellets and remove any dust that may be in the hopper. After the hopper is clean, you can reset the grill and use the air to clear out any dust that may have accumulated in the grill.

If the pellets are jammed because they are too dry, adding a few drops of food-grade lubricant like olive oil or vegetable oil will help to loosen them. If the pellets have become wet, they will need to be dried out before they will feed properly again.

Traeger – Electronic Failure

If your electronic components fail and the grill won’t operate, you will need to contact Traeger’s customer service for help. If your grill is still under warranty, you should be able to get it replaced or repaired at no cost to you. 

It is important to keep your grill maintained to prevent problems from becoming serious enough to require repair. Performing a deep clean on your grill every few months can help to prevent minor issues from becoming major problems.

Conclusion

Finally, remember to stay calm and collected if your grill has a problem. You can’t fix a problem if you are too worked up to think straight and on the flip side if you don’t know how to reset Traeger grill.

Take a deep breath and follow these steps to get through it. And once you’ve reset the grill, be sure to keep it clean and well-maintained. That will help to prevent problems from happening in the first place. Also, you must be aware that how to use smokeless grill for easy cooking”.

That said, if you follow these instructions and your Traeger still isn’t working properly, it’s probably time to replace it. While Traeger is one of the best brands, they aren’t indestructible. After all, nothing is.

FAQ’s

How do I reset my Traeger pro?

Press and hold the Go, Set, Cancel button for 10 seconds or until the LED starlight flashing red is no longer illuminated. Then press and release your Traeger’s cook control to turn off Power cooking on the Off position.

How do you restart a Traeger grill?

There are a few ways to restart a Traeger grill. You can use the reset button on the grill or you can use the power cord to turn off and then back on the grill. Some external lights allow you to restart the grill.

How do I restore my Traeger to factory settings?

Restoring your Traeger to factory settings is easy. Press Menus > Settings on the Control Panel. Scroll down approximately 1/3 of the way on the first menu line until you see Restore Defaults. Press Enter on that menu line again seven times for a total of eight presses.

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like